1/4×1/4×1/4inch 3-way Y Splitter Aquarium Quick Connect Push Fit RO Water
Made of high PP material, good toughness, high strength, not leaking.
Quick connector to use faster, more convenient, more secure.
Widely used in pure water, water, food and beverage series of parts.
3-way Y Splitter Aquarium Quick Connect.Install more effort and worry!
Color : White
Diameter : 1/4″ (approx. 6mm)
Model : Y type three joints
Installation and the removal procedure :
Installation procedure :
1. In threaded quick connector with raw belt wrapped;
2. With the appropriate force to tighten fast connections, if excessive force may tighten bad connector, if the force is not enough can cause leaks water;
3. The top tube will be inserted vertically cut flat knife. The wall of the tube to be inserted should be smooth, clean, no scratches;
4. Remove the blue clamp and cut the top of the insertion tube quick connector, plug in the end;
5. Put the card at the quick connector clamp loop, to avoid accidental unplugged in use process.
Removal procedure :
1. First check the inlet whether to close, to ensure the water pressure is zero;
2. Removed the quick snap loop;
3. The chuck the quick connector hold down at the same time, the other hand to pull out the tube.
1x 1/4″x1/4″x1/4″ 3-way Y Splitter Aquarium Quick Connect