4 Axis Stepper Motor Driver Board Controller Laser board For DIY Laser Engraver
|Power Requirement||higher than12V 2A|
|Support Stepper Motor||Motor within 2A 2-phase 4-wire|
|Input Voltage||7.5V-12V (the voltage will affect the laser effect))|
|Power Interface||DC5.5 – 2.1 (Inside is positive electrodes and ouside is negative electrodes)|
1. Expansion of functions: Limit, subdivision, stop, hand control, the fan, low light, external relay
2. Fit for DIY desktop laser engraver,dispensing machines printer,plotter,tool CNC.
3. 4-axis linkage, Y-axis dual interface, can drive a stepper motor within 2A 2-phase 4-wire
4. MINI USB interfaces, 12V power supply, delivery lines! Send software! Technical support!
5. Large MOS tube,onboard DC buck module, wire jump ADJ can adjust manually the laser voltage to control the laser power
Please try to use this software to run the device:
About the Activation code,please send your code and serial number to our customer service: firstname.lastname@example.org to get it. Thank you.
(Every control board has different keys. For example MUKY-SEEA-ASDF-QWRE Serial: 055666)
Jumper inserted in ADJ, Regulate the voltage module can control the laser voltage
5V laser module group should wire into ADJ and regulate the output voltage of 5V or less to pick Laser Module
The motor can not work hight than 2A, when the motor work for a long time in 1A to 2A , please pay attention to heat
1X USB 4Axis Stepper Motor Driver Board
1X USB Cable
2X 2pDupont Lines
5X 4PDupont Lines